Agricultural TYRE Proper Use And Maintenance Inseparable

Agricultural TYRE is an important part of the line of agricultural machinery, a direct impact on the use of a variety of vehicle performance, the correct use and maintenance of Agricultural TYRE to extend the life of the Agricultural TYRE, the use of agricultural machinery is very important. Agricultural TYRE service life of the length, of course, with the quality of the Agricultural TYRE have a certain relationship, but also with the correct use and maintenance inseparable.

Causes of Agricultural TYRE wear and its prevention

First, the reasons for Agricultural TYRE wear.

Agricultural TYRE pressure is too high too low will affect its life, but also unfavorable safe driving. Agricultural TYRE pressure is too low or overload will greatly increase the use of the carcass stress and deformation, so that the Agricultural TYRE and the ground area between the mechanical friction and carcass friction increased, causing Agricultural TYRE wear and damage. Agricultural TYRE pressure is too high, will increase the Agricultural TYRE ply bear the tensile stress, increased the shear stress between the tread, the carcass stiffness increases, the ground area decreases, resulting in deterioration of Agricultural TYRE performance and wear and damage. Scientific inflation standards should be: to the Agricultural TYRE's standard air pressure as a benchmark, with the temperature changes, a slight change in Agricultural TYRE pressure fishes. For example: summer should be 5% to 7% lower than the winter, taking into account the high temperature in summer, the gas heat, the volume increases the pressure is high, contrary to the winter must meet the standard pressure or slightly lower.

The use of a sharp start, braking and sharp turns will accelerate the Agricultural TYRE wear, causing collapse of the block and the bead damage.

Quickly across the high and sharp obstacles, easily lead to Agricultural TYRE by cutting, bursting, thorns and other injuries.

Long time high speed. According to the Agricultural TYRE own characteristics, with the speed of the increase, the Agricultural TYRE deformation frequency increases, resulting in increased Agricultural TYRE temperature, causing wear and damage.

Traction performance in the soft soil is poor, especially after the operation of the paddy field or after the rain in the muddy road, easy to produce slippery wear Agricultural TYREs.

Improper adjustment of the front beam caused by tread wear.

Agricultural TYRE in the disassembly and maintenance process, such as disassembly inadvertently, pry, hit the bead and rims, or into the inner tube before the Agricultural TYRE into the sand, stone and other debris, resulting in Agricultural TYRE damage.

Parking and Agricultural TYRE custody properly, by the sun exposure, oil erosion, the Agricultural TYRE corrosion deterioration.

Second, to prevent the method.

Agricultural TYRE in the use of the process, should always check the Agricultural TYRE pressure, according to the sidewall of the standard pressure inflated.

Start, turn and brake can not be too fierce, try to avoid the gear start, loose clutch, heavy load throttle high-speed start, turn dead and kill the steering wheel, and unnecessary brakes and so on. As the driving skills are not high, there are many new drivers due to lack of experience, often in the traffic in the frequent emergency braking, often take emergency start and high-speed steering and U-turn, traction and traction resistance is too high, the wheel slippery for a long time, or Hastily through the obstacles, and some will not choose the road and the corresponding speed, which will also affect the Agricultural TYRE life.

In the uneven road and in soybeans, corn and other crops on the ground, should slow down.

Speed should be based on the actual situation to master, try to avoid long-distance high-speed transport.

In the field operations occurred when trapping, should try to avoid the wheel in the pit high-speed idling.

Correct maintenance of the steering system, to maintain the correct value of the beam before the Agricultural TYRE to prevent early wear.

When assembling Agricultural TYREs, they should be carried out on a clean ground without a gap or sharp angle. When installing, do not bring the sediment into the direction of the pattern.

Do not contaminate the oleic acid on the Agricultural TYRE, alkali, etc., to prevent corrosion.

Long time does not work, the roof should be, so that the Agricultural TYRE does not bear the pressure, but do not deflate. In addition, the Agricultural TYRE should be prevented from sun exposure. Long-term parking locomotives and other equipment, if the Agricultural TYRE is not vacant, especially when the Agricultural TYRE pressure is lower than the specified value, due to the occurrence of stable deformation, in some cases will make the outer Agricultural TYRE body delamination and fracture, thus greatly reducing Agricultural TYRE life.

Under normal circumstances, the Agricultural TYRE after a certain period of time, the left and right Agricultural TYREs should be interchangeable position to extend the Agricultural TYRE life.